|
Our ZEGO Z-Board (EIFS) is an External Insulating Facade System which comes in your choice of 60mm or 100mm foam panels
Suitable for new homes up to Bushfire Attack Level BAL-19* first floor additions, alterations or renovation facades
Fire Rating in BAL-40 and BAL-FZ ( Flame Zone ) areas and walls on or within 900mm of a boundary use ZEGO FireFORM which also interlocks with the Z-Board and Domestic HomeFORMS
Fixed to timber or steel stud frame vertically at 300mm or horizontally at maximum 600mm centres
Self-supporting and interlocking
Also available in other thicknesses by request.
Easy to handle in windy conditions during installation
Apply Breathable Sarking or TYVEK Home wrap to frame
Large convection current grooves eliminates condensation
Fixed through to your structural timber or steel frame with only 9 fixings per square metre
No adhesives or battening required unless specified by the project designer ( built in convection grooves )
Thermally insulated and is a reflective barrier to sound absorption
External Finishes include but not limited to are Acrylic textured or smooth coloured render 8mm+2mm for Acrylic base and top coat renders, Stone – Stack stone, tiles, Alucabond, Batten and weatherboard, MiniOrb, ColorBond
* Up to BAL-29 ZEGO Z-Board walls to be rendered in Acrylic render e.g. Dulux Acra Tex 8mm polymer base coat with 160gram 4×4 or 5×5 fire retardant alkaline resistant render mesh in centre + Finish coloured smooth or textured top coat of 2mm minimum or 6mm Fibre Cement sheeting or Colourbond/Miniorb or Stone facing or Bushfire Resistant timber finishes
ZEGO Z-Board (EIFS) has a Design Registered Render Lock Dovetail Groove that mechanically locks the render to the ZEGO Flame Retardant INSUL8 “F” Grade EPS with self-extinguishing properties
|
