|
more info:
http://www.dreamboxs.com/dm500-hd.htm
Dreambox 500 HD satellite receiver General Specifications:
Specifications:
400 MHz MIPS processor
Linux Operating System
2 x LED - display
MPEG-2 / H.264 Hardware decoding
Tuner: DVB-S2
1 x Smart Card Reader (Dreamcrypt CA)
Service Mini-USB
10/100Mbit Ethernet Interface
1 x Scart (RGB, FBAS or S-Video)
HDMI
2 x USB 2.0
analog modem
S/PDIF Interface for digital bit stream out (AC-3)
64 MByte Flash, 256 MByte RAM
unlimited channel lists for TV/Radio
channel-change time < 1 second
automatic service scan
directly bouquet-lists
EPG (electronic program guide)
multiple LNB-Switching control (supports DiSEqC)
OSD in many languages and skin-support
Teletext Decoder
External 12V power supply
DM500 HD Technical Data
DBS-Tuner DVB-S2:
Frequency Range: 950-2150 MHz
Demodulation: DVB-S (QPSK) / DVB-S2 (8PSK, QPSK)
Symbol rate DVB-S: 2-45 Mbaud/s, SCPC / MCPC
DVB-S2: 10-31 Mbaud/s (8PSK), 10-30 Mbaud/s (QPSK)
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32kHz, 44.1kHz, 48kHz, 16kHz, 22.05kHz, 24kHz
Output analog:
Output Level L/R 0, 5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0, 5 Vss on 75 Ohm
Sampled Data Filtering 32kHz, 44.1kHz, 48kHz
S/PDIF-Output optical, Toslink
Video output:
Output Level 1 Vpp + / - 0.3 dB on 75 Ohm
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS, RGB, S-Video
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
LNB power and polarisation pertuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11, 5V at 400mA
LNB Voltage horizontal < 20V no load, > 17, 3V at 400mA
LNB shut-off in standby mode
Number of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control
Power consumption:
< 12W at 12V operation
< 1W Standby
External power supply:
Input:110-240V AC / 50-60Hz / 0, 6A
Output:12V = / 3, 0A
Physical specification:
Ambient Temperature: +15��C to +35��C
Humidity: < 80%
Dimensions (W x D x H): 195 mm x 130 mm x 40 mm
|
